Sliding Door Grease
Moderators: User administrators, Moderators
Sliding Door Grease
Think the bottom runner on my sliding door needs some grease, what sort should I use and how much?
i'd have said any and plenty of it. i'm going to do mine tomorrow as it happens and will splodge plenty of ordinary grease on the bottom one but a miniscule ammount of coppergrease on the top so it doesn't cover everyone who goes near it ![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
LT owner and positively rattling around with the new found space
member 3339
member 3339
- Tex Ritter
- Registered user
- Posts: 436
- Joined: 10 Oct 2005, 09:14
- 80-90 Mem No: 1057
- Location: Northumberland.
rozzolink wrote:i'd have said any and plenty of it. i'm going to do mine tomorrow as it happens and will splodge plenty of ordinary grease on the bottom one but a miniscule ammount of coppergrease on the top so it doesn't cover everyone who goes near it
I second this reply. I did my top runner with 'copperslip' and then spent a load of time during my 3 weeks in SOF continually wiping the excess off, due to the heat, it ran like a snotty nose.
Moral; As 'rozzolink' says, use grease sparingly.
If you never have a route planned ...how can you ever be lost?
- Westy.Club.Joker
- Registered user
- Posts: 484
- Joined: 18 Sep 2006, 19:37
- 80-90 Mem No: 2863
- Location: Sunny Lancs. 1988 1.6TD Westfalia Club Joker pop-top
Copperslip is not a lubricant, it is an anti-sieze compound. OK on bolts and nuts that you want to undo later, but not meant to be used for "greasing" bearings etc.
Try getting some marine grease (trailer bearing grease) or similar, will stay on due to being quite thick and also waterproof so will stay put, you only need a smear. It will pick up dirt and fluff anyway, so needs to be kept clean and redone now and again![Smile :)](./images/smilies/icon_smile.gif)
Try getting some marine grease (trailer bearing grease) or similar, will stay on due to being quite thick and also waterproof so will stay put, you only need a smear. It will pick up dirt and fluff anyway, so needs to be kept clean and redone now and again
![Smile :)](./images/smilies/icon_smile.gif)
Keep it real.
Search first - ask second ;>}
Search first - ask second ;>}
Waterprrof bearing grease sometime sknown as 'blue grease' Mobil did it in nice tubes for about £3 a throw but have heard from local Motofax that its been discontinued (they bought up last of local stock).
Castrol zinc based grease for brake rubbing parts (cams and pivots of shoe brakes) should stick around... its thick and off-white/light yellowish colour - obviously good for sliding metal parts and waterproof. Prob. only large tins though
Castrol zinc based grease for brake rubbing parts (cams and pivots of shoe brakes) should stick around... its thick and off-white/light yellowish colour - obviously good for sliding metal parts and waterproof. Prob. only large tins though
The 80-90 Tech Wikipedia Your 1st port of call ![idea! :idea](./images/smilies/idea.gif)
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
![idea! :idea](./images/smilies/idea.gif)
1.9TD Syncro Doka / Syncro Kastenwagen / 16" Kombi Camper
Syncronaut No. 1
- Tex Ritter
- Registered user
- Posts: 436
- Joined: 10 Oct 2005, 09:14
- 80-90 Mem No: 1057
- Location: Northumberland.
Westy.Club.Joker wrote:Copperslip is not a lubricant, it is an anti-sieze compound. OK on bolts and nuts that you want to undo later, but not meant to be used for "greasing" bearings etc.
Try getting some marine grease (trailer bearing grease) or similar
There were no bearings greased on the door, just the top track guide.
Copperslip was the only 'grease' to hand at the time.
![Wink :wink:](./images/smilies/icon_wink.gif)
I don't think there is a bearing in the slider top, just a nylon type wheel/block
![Question :?:](./images/smilies/icon_question.gif)
But there again I could be wrong
![Shocked :shock:](./images/smilies/icon_eek.gif)
Tex Ritter
If you never have a route planned ...how can you ever be lost?
- CovKid
- Trader
- Posts: 8409
- Joined: 30 Apr 2006, 13:19
- 80-90 Mem No: 3529
- Location: Ralph - Coventry (Retired)
- Contact:
Just a thought, and something I'll be doing next time is to use 'food; grease. Its used for greasing up equipment in food industry and is pure white. My reservation about regreasing sliding doors is that kids have a habit of sticking their fingers into grease areas and its a devil to get off hands and/or clothes. Food grease may well be a good solution. As far as I know the properties are identical.
- Tex Ritter
- Registered user
- Posts: 436
- Joined: 10 Oct 2005, 09:14
- 80-90 Mem No: 1057
- Location: Northumberland.