Hello all,
First time posting on this forum!
I have an '81 air cooled T25 that unfortunately now requires replacement inner and outer sills welding in on the offside (they are rotten and beyond patching at this point).
I have purcheased the new parts from JK (Preservation Parts Offside Inner Sill with Jacking Point for VW T25 1979—1992 Part Number: J11408 *&* Sill and Lower Side Panel Offside (Right) VW T25 1979–1992 Part Number: J13898) and now need to have them fitted!
I appreciate it is a relatively big job but was wondering if anyone can recommend any good (and ideally reasonably priced!) places to undertake the work? Unfortunately, I have never welded in my life and don't fancy taking this on as a first attempt!
Also needs a new clutch fitting (parts also ordered) and then he should hopefully be (relatively) spring/summer ready!
The van is based in Weybridge, Surrey so ideally finding a good garage locally from here would be grand.
Thanks in advance,
Tom.
Decent welders in Surrey/SW London? (inner & outer sills)
Moderators: User administrators, Moderators
-
- Posts: 2
- Joined: 30 Sep 2023, 23:08
- 80-90 Mem No: 0
- sarran1955
- Registered user
- Posts: 1450
- Joined: 11 Mar 2009, 18:51
- 80-90 Mem No: 6754
- Location: 6, les Hauts de Sarran 19800, Sarran ,Limousin ,FRANCE
Re: Decent welders in Surrey/SW London? (inner & outer sills)
Hello and welcome,
Air-Cooled Bliss....
CT or CU engine..??
I've got the welding kit and the workshop...but a long way away...
Cordialement...
Air-Cooled Bliss....
CT or CU engine..??
I've got the welding kit and the workshop...but a long way away...
Cordialement...
-
- Registered user
- Posts: 179
- Joined: 21 Jun 2019, 20:56
- 80-90 Mem No: 16913
- Location: Weybridge
- Contact:
Re: Decent welders in Surrey/SW London? (inner & outer sills)
Hi Tom
have you tried the garage that next to the jolly farmer pub in weybridge
have you tried the garage that next to the jolly farmer pub in weybridge
Vw T25 1.9 TD Z1 hightop rusty but Less rusty than when I got it. lol:
-
- Posts: 2
- Joined: 30 Sep 2023, 23:08
- 80-90 Mem No: 0
Re: Decent welders in Surrey/SW London? (inner & outer sills)
I had front seatbelt mount and some other minor bits repaired, and tank replaced by Surrey Auto Works just outside Ottershaw - so pretty close to you. Had to book it in well in advance as they always seem busy (which I take as a good sign). They have fairly labour rate, but were very pragmatic on the hours etc so job ended up pretty reasonable overall.
https://www.surreyautoworks.com/
https://www.surreyautoworks.com/
1990 - EJ251 - 5sp AAP - 'Weekender'