AAZ question...yes, another one
Moderators: User administrators, Moderators
AAZ question...yes, another one
I'm looking to fit an aaz into my syncro and figured all I would have to do is get a custom exhaust made.
Am I right or do I also have to play with the engine mounts, or anything else?
Am I right or do I also have to play with the engine mounts, or anything else?
RHD Syncro twin slider (AGG) - orange
- ringo
- Registered user
- Posts: 2245
- Joined: 14 Oct 2005, 05:41
- 80-90 Mem No: 1375
- Location: Nottingham
Re: AAZ question...yes, another one
You only have to get a custom exhaust made if you fit the AAZ exhaust manifold. If you fit the JX one you can stay stock.
It just fits in but is about 2 inches taller - so you have to cut a hole in the engine hatch...
Good luck
Ringo
It just fits in but is about 2 inches taller - so you have to cut a hole in the engine hatch...
Good luck
Ringo
Now driving a big bad VW LT Florida.
Re: AAZ question...yes, another one
If memory serves I had to have my JX exhaust manifold machined slightly - think it was to match up the ports...
1985 1.6TD Gipsy
1966 MGB
2005 1.9TD Convertible Beetle
1966 MGB
2005 1.9TD Convertible Beetle
Re: AAZ question...yes, another one
I couldn't find anyone to weld it up and match the ports. Concensus seems to be that the metal is too thin to port the jx manifold as is (?).
Don't mind having to cut the engine lid a tad though. That seems like the least of my worries right now....
Don't mind having to cut the engine lid a tad though. That seems like the least of my worries right now....
RHD Syncro twin slider (AGG) - orange
- ringo
- Registered user
- Posts: 2245
- Joined: 14 Oct 2005, 05:41
- 80-90 Mem No: 1375
- Location: Nottingham
Re: AAZ question...yes, another one
I seem to remember the port size is more of an issue with the inlet manifold - i never had an issue with using the jx exhaust manifold.
Ringo
Ringo
Now driving a big bad VW LT Florida.
-
- Trader
- Posts: 9017
- Joined: 09 Oct 2005, 17:31
- 80-90 Mem No: 1967
- Location: Sutton in'it Syncronaut: 123
- Contact:
Re: AAZ question...yes, another one
You dont need to cut the engine lid on a Syncro as the engine sits lower than on a 2wd van.
jed
jed
Re: AAZ question...yes, another one
Ahhh...what Ringo said - that may have been it.....
1985 1.6TD Gipsy
1966 MGB
2005 1.9TD Convertible Beetle
1966 MGB
2005 1.9TD Convertible Beetle
Re: AAZ question...yes, another one
I've read in a few places that engine mounts may need to be modified. This true for a syncro as well?
I like the idea of using all the aaz components to get the true bhp out of it.
I like the idea of using all the aaz components to get the true bhp out of it.
RHD Syncro twin slider (AGG) - orange
- ringo
- Registered user
- Posts: 2245
- Joined: 14 Oct 2005, 05:41
- 80-90 Mem No: 1375
- Location: Nottingham
Re: AAZ question...yes, another one
The T25 engine mounts just fit.
You only need to modify one of them if you start changing turbo's IIRC. Thats advanced stuff and i think there is some info in the wiki. I never went that far - stock power and MPG was just what i wanted.
Ringo
You only need to modify one of them if you start changing turbo's IIRC. Thats advanced stuff and i think there is some info in the wiki. I never went that far - stock power and MPG was just what i wanted.
Ringo
Now driving a big bad VW LT Florida.
Re: AAZ question...yes, another one
Thats exactly what I wanted to hear about the engine mounts
Anyone know somewhere/someone that can make an exhaust for my AAZ once its fitted to the Syncro?
I'm in London but willing to travel....
Glad this forum's around... I dont feel too alone in trying to do something thats way out of my league with the help of your good selves !!
Thanks, David
![OK! :ok](./images/smilies/ok.gif)
Anyone know somewhere/someone that can make an exhaust for my AAZ once its fitted to the Syncro?
I'm in London but willing to travel....
Glad this forum's around... I dont feel too alone in trying to do something thats way out of my league with the help of your good selves !!
Thanks, David
RHD Syncro twin slider (AGG) - orange
-
- Registered user
- Posts: 357
- Joined: 30 Oct 2005, 20:26
- 80-90 Mem No: 1710
- Location: Bookham Surrey
Re: AAZ question...yes, another one
Longlife exhaust stanley park road wallington surrey .They made a stainless steel down pipe for a 1Y exhaust manifold to fit a 1.6td silencer cost aprox £70.They wil custom make any exhaust system.dcfb77 wrote:Thats exactly what I wanted to hear about the engine mounts![]()
Anyone know somewhere/someone that can make an exhaust for my AAZ once its fitted to the Syncro?
I'm in London but willing to travel....
Glad this forum's around... I dont feel too alone in trying to do something thats way out of my league with the help of your good selves !!
Thanks, David