I'm just about to do the wiring / relay upgrade so that we have decent headlights at last before we set of for Shetland next week. There's lots of useful info on here and I'm confident about doing it (I've done similar on two 70's Beetles with good results).
I've just got one query which is which side do I need to pick the relay trigger feed up from so that the main beam warning light on the dash is activated? There seems to be quite a bit of conflicting info about this on here, on You Tube etc. Its an '87 Syncro and its left hand drive.
Thanks as ever,
Pete
Headlamp upgrade query - ensuring main beam dash light.
Moderators: User administrators, Moderators
-
- Registered user
- Posts: 649
- Joined: 24 Jul 2010, 13:06
- 80-90 Mem No: 8569
- Location: West Cornwall
Headlamp upgrade query - ensuring main beam dash light.
1987 Westy Syncro 2.5 DJ (Courtesy of 025MOTORSPORT)
Syncronaut #171
Syncronaut #171
- scotttie
- Registered user
- Posts: 122
- Joined: 11 May 2011, 09:56
- 80-90 Mem No: 16828
- Location: East Sussex
Re: Headlamp upgrade query - ensuring main beam dash light.
Hi Pete, I did a write up on this after I did it a few years back. With the method I used the main beam warning light works as expected. Hopefully it might be of use: viewtopic.php?p=8286443#p8286443
______________________________________________________________________
2.1DJ Syncro Reimo hightop
2.1DJ Syncro Reimo hightop
-
- Registered user
- Posts: 649
- Joined: 24 Jul 2010, 13:06
- 80-90 Mem No: 8569
- Location: West Cornwall
Re: Headlamp upgrade query - ensuring main beam dash light.
Thanks very much scottie. I am going to go a slightly different route although exactly the same principle - power will come direct from the battery although I may follow your idea of taking the triggers from the back of the fuse box rather than from nearer the actual headlights. Basically I'm following this idea viewtopic.php?t=101326&sid=40f433475872 ... 0&start=15 (see California Dreamin post dated 27 April 2012).
As you'll see from this thread there is some debate about about which side to use for the trigger and it doesn't seem to get resolved - so my query still stands!
Thanks for getting back.
Pete
As you'll see from this thread there is some debate about about which side to use for the trigger and it doesn't seem to get resolved - so my query still stands!
Thanks for getting back.
Pete
1987 Westy Syncro 2.5 DJ (Courtesy of 025MOTORSPORT)
Syncronaut #171
Syncronaut #171
- Mocki
- Membership Admin
- Posts: 17026
- Joined: 29 Sep 2005, 09:27
- 80-90 Mem No: 428
- Location: Mansfield Notts
- Contact:
Re: Headlamp upgrade query - ensuring main beam dash light.
On my rhd the main beam telltale is from the o/s head lamp ……..
Steve
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
tel / txt O7947-137911
________________
1989 2.1LpgWBX HiTop Leisuredrive Camper
1988 2.1 Caravelle TS TinTop Camper
-
- Registered user
- Posts: 649
- Joined: 24 Jul 2010, 13:06
- 80-90 Mem No: 8569
- Location: West Cornwall
Re: Headlamp upgrade query - ensuring main beam dash light.
Thanks Mocki. Its just occurred to me that I ought to be able to work it out from the wiring diagram in Bentley as this is for LHD. Off to peruse...!
1987 Westy Syncro 2.5 DJ (Courtesy of 025MOTORSPORT)
Syncronaut #171
Syncronaut #171
-
- Registered user
- Posts: 649
- Joined: 24 Jul 2010, 13:06
- 80-90 Mem No: 8569
- Location: West Cornwall
Re: Headlamp upgrade query - ensuring main beam dash light.
Sussed it! Thanks to Bentley. It definitely is the right hand side. The white / black wire is the one that I want for the high beam trigger. That £30 that I spent on the Bentley at Dubfreeze 25 years ago has repaid itself again (if only Bentleys were still £30!)
Thanks to the people who got back to this query.
Pete
Thanks to the people who got back to this query.
Pete
1987 Westy Syncro 2.5 DJ (Courtesy of 025MOTORSPORT)
Syncronaut #171
Syncronaut #171